mp2mp
Runs right hereFiles are converted locally. Nothing gets uploaded.

// Studio utility

MPC 2000XL Kit Builder

A free kit maker and kit creator for the MPC 2000XL. Drop your own sounds on the pads and export a .PGM program with its sounds, sized to fit the machine's memory.

MPC 2000XL // Kit builderReady
Program:NewKit
Bank:A
Sounds:0/64
Memory:0.00 MB of 2 MB
Pad bank
A13
A14
A15
A16
A09
A10
A11
A12
A05
A06
A07
A08
A01
A02
A03
A04

Drop a sound on a pad, or click an empty pad to choose a file. Drop several files to fill the following pads. Press a loaded pad to hear it. The switch above each pad sets how it plays: Poly lets hits overlap, Mono cuts the previous hit, and Note off plays only while the pad is held.

Output options
Machine memoryInstalled RAM
Export is blocked above this limit
ChannelsMono halves memory
Stereo keeps panning inside samples
Silent tailsSaves memory
Trim cuts silence below -80 dB
Sound filesNative or portable
.SND is native and loads fastest
File namesDisk compatibility
8 is safe when copied from a computer
Sample memory0.00 MB of 2 MB
0 of 64 pads

Have a modern MPC expansion instead? Use the Expansion Converter →

Step by step

How to build a kit for the MPC 2000XL

  1. 01.Sounds

    Drop sounds on the pads

    Drag audio files onto the pads, or click an empty pad to choose a file. Use the A, B, C and D buttons to reach all 64 pads. Click a loaded pad to hear it.

    Reads WAV, plus the formats your browser can decode

  2. 02.Memory

    Stay inside the memory

    Choose how much memory your machine has. The meter shows what the kit needs; mono and trimmed tails make it smaller. Export is only possible when the kit fits.

    2 MB standard, 18 or 32 MB expanded

  3. 03.Export

    Export and load

    Name the program and export a ZIP with one .PGM and its sounds. Copy the folder to a disk the MPC 2000XL can read and load the .PGM.

    Output: ZIP with the .PGM and its sounds

Documentation & FAQ

Questions and answers

Which audio files can I use?
WAV files of any bit depth and sample rate, including 24-bit and 32-bit float. Other formats such as MP3 and FLAC work when your browser can decode them. Everything is converted to 16-bit, 44.1 kHz, which is what the MPC 2000XL plays.
Can I set tuning, decay or mute groups here?
No. Besides placing sounds on pads, the Kit Builder only sets each pad's voice overlap (Poly, Mono or Note off) and leaves every other setting at the machine's default. Those settings are better adjusted on the MPC 2000XL itself, while you listen to the beat.
Which note does each pad play?
The same note it plays in a new program on the machine: pad A01 is note 37, A02 is note 36, and so on through bank D. Sequences recorded with the default pad assignment line up with the kit.
Are my samples uploaded?
No. The sounds are read, converted and packed into the ZIP in your browser. Nothing is sent to a server.